OneTouch Select Plus® test strips provide individualised blood glucose readingsProvide accurate results in just 5 secondsRequire a very small blood sample - 1 μLAutomatically adjust for natural red blood cell variations
What’s in the box
Vial with 50 test strips
Before using the OneTouch Select Plus® test strips to test your blood glucose, carefully read the Owner’s Booklet for your meter and the inserts that come with the components of the system.How do I insert the OneTouch Select Plus® test strip into the meter?Insert the OneTouch Select Plus® test strip into the test strip port with the contact bars facing you.How much blood do I need for the OneTouch Select Plus® test strip?The OneTouch Select Plus® test strips require a minimum of 1.0 μL of blood.How do I apply blood to the OneTouch Select Plus® test strip?
How should I store my OneTouch Select Plus® test strips?
- Keeping your finger extended and steady, move the meter and test strip towards the blood drop.
- Gently touch the channel to the edge of the blood drop.
- Wait for the confirmation window to fill completely. The blood drop will be drawn into the narrow channel and the confirmation window should fill completely.
- Keep test strips in a cool, dry place between 5°C and 30°C.
- Do Not test if there is condensation (water build-up) on your meter. Move your meter and test strips to a cool, dry place and wait for the meter surface to dry before testing.
- Do Not open the test strip vial until you are ready to remove a test strip and perform a test. Use the test strip immediately after removing it from the vial, especially in high humidity environments.
- Close the cap tightly on the vial immediately after use to avoid contamination and damage.
- Only store unused test strips in their original vial.
- Do Not return the used test strip to the vial after performing a test.
- Do Not re-use a test strip that has had blood or control solution applied to it. Test strips are for single use only.
- Do Not test with a test strip that is bent or damaged.
- You may touch the test strip anywhere on its surface if your hands are clean and dry. Do Not bend, cut or modify the test strip in any way.
- When you first open a vial of test strips, record the discard date on the label. Refer to the test strip insert or vial label for instructions on determining the discard date.